Table of Contents
Advertisement
Select Mode & Setup
Operation
Press
Display Shows
2. Display the
Main
then
menu, and
select
or
Setup
3. Move to
the Setup
selection
menu
4. Move to
the Setup
Screen
5. If required
or
select SLM
Response
from the
then
Setup
screen
6. If required,
change the
weightings to
enable
quick
edit
mode
Page 28 - CEL-450/490 Operators Handbook
Comments
This is the Main menu
screen with the reverse
video cursor highlighting the
Setup option.
This menu allows any of the
available setups for
broadband to be selected.
Highlight the setup that is to
be used.
This setup will also be
stored and used the next
time the instrument is
switched on.
This screen allows the
following parameters to be
selected:
SLM weightings,
Period measurement on/off,
Measurement Functions,
Dose parameters.
This screen allows the
following weightings to be
set:
RMS: A, C, Z,
Time: F, S, I,
Peak: A, C, Z,
Q: 3, 4, 5, 6.
Use
and
to select a
field.
Use
and
to change
the entry in the field.
Save the settings by
pressing
again to
resume normal operation.
Press
to return to the
Setup screen.
Hide quick links:
Advertisement
Table of Contents
