CASELLA CEL CEL-450 Handbook page 26

Select Mode & Setup
Operation Press Display Shows
5. If required,
set
Duration to
and Sync enable
Timer quick
edit
mode.
6. When a
CEL-490 is
followed
being
used, if
by
required
select
Delay
Timer from
the Timers
menu
7. Select
second
Delay
Timer
menu
8. If required,
set the
Delay Timer to
enable
quick
edit
mode
Page 26 - CEL-450/490 Operators Handbook
Comments
Use and to select a
field.
Use and to change
the entry in the field.
Save the settings by
pressing again to
resume normal operation.
Press to return to the
Timers menu.
The first menu allows the
seven sets of run start and
stop times to be repeated
up to 999 times.
When required, use to
enable quick edit mode, use
and to change the
entry, then save the setting
by pressing again.
The second menu controls
seven sets of run start and
stop times where the time
is shown as
Day/Hour:Minute.
Different measuring times
can be set for each day of
the week with the option of
repeating them over a
period of several weeks.
When a Delay Timer is used
(√), the run starts at the
preset start time and stops
at the preset stop time.
Use and to select a
field.
Use and to change
the entry in the field from X
to √.
Save the settings by
pressing again to
resume normal operation.
Press to return to the
Timers menu.