Display Functions; Auto-Restart Function; Emergency Function - White-Westinghouse WASC09C2ADLW Instruction Manual

Display functions

Auto-restart function

The appliance is preset auto - restart
function by manufacturer. With this
function the air conditioner can keep
the selected settings after a blackout or
a voltage drop.
To deactivate the AUTO-RESTART
function ,proceed as follows:
1. Switch the air conditioner off and
plug it off.
2. Press the emergency button
meanwhile plug it in.
3. Keep pressing the emergency
button for more than 10 seconds
until you hear four short beeps
from the unit. The AUTO-RESTART
function is off.
4. To activate the AUTO - RESTART
function , follow the same
procedure until you hear three short
beeps from the unit.
27 Display Functions

Emergency function

If the remote control is lost,proceed as
follows: Lift the unit s front panel to
reach the emergency button of the
air conditioner.
1. If you press the button once ( one
beep ), the air conditioner will work
in forced cooling function;
2. if you press the button twice ( two
beeps ), the unit will work in forced
heating function.
3. To switch off the unit , you just need
to press the button again ( a single
long beep) . After 30 minutes in
forced function , the air conditioner
will automatically start working in
FEEL mode.
Attention
The shape and position of the
emergency button may vary according
to the model, but their function is the
same.
Emergency button
display PCB
Emergency
button
front panel
Display Functions
28