Table of Contents
Advertisement
Getting Started
This OneRemote DAB/FM tuner has been designed for operation in a Bang & Olufsen remote control system allowing
full control with a Bang & Olufsen remote control terminal either directly or via connection to Bang & Olufsen
equipment.
Thus the tuner is Beolink compatible.
Direct Mode or CableLink Mode
The OneRemote DAB/FM tuner is connected to Bang & Olufsen equipment via the 7-pin DIN cable with or without
adaptor, and through option programming it may be controlled as follows:
1. Via the tuner's built in IR-receiver, "Direct Mode"
Direct Mode is used when connection to an input with control data is not possible.
2. Via the cable connected Bang & Olufsen equipment, "CableLink Mode"
CableLink Mode is used only when connection to an input with control data is possible.
See page 6 for Option Programming.
Factory Settings
The factory setting is for "Direct Mode" and manual power control.
The factory setting for input socket and selected source is:
If the DAB/FM tuner is connected to a different input, the option should be programmed accordingly.
See page 6 for Option Programming
www.oneremote.dk
Remote control
Source
Beo4, Beo5 or Beo6
N.MUSIC, A.MEM2 or TAPE2
Beolink 1000
SHIFT A.TAPE
Page 3
Advertisement
Table of Contents
