Page 1
OneRemote DabWiFi6 Advanced Tuner for Bang & Olufsen Systems Handling DAB/DAB+ – FM - Bluetooth - Internet Radio Spotify Connect- Music Player Setup Guide Control with Bang & Olufsen Remotes 3001.2025.UK.S2...
Contents THIS GUIDE..............................4 The DabWiFi6 must be setup to FIT the Bang & Olufsen system ..................4 CONNECT DABWIFI6 WITH DEFAULT PERSONALITY..............5 VOLUME ................................6 INSTALLATION ............................. 6 CONNECTIONS .............................. 7 Antenna connection ................................7 OPTIONS ................................. 8 Available Source Options.
Page 3
The BeoLink Converter connected to a Bang & Olufsen TV ..................23 BEOLINK ACTIVE – CONNECTION VIA A BEOLINK ACTIVE IN ANY LINK ROOM ....24 Connect the DabWiFi6 tuner via the PC input socket ....................24 OLDER BANG & OLUFSEN REMOTES ....................25...
This guide covers the connection of the DabWiFi6 tuner to a Bang & Olufsen system. Check the User Guide for the DabWiFi6 tuner for the daily control with a Bang & Olufsen remote. THE DABWIFI6 MUST BE SETUP TO FIT THE BANG & OLUFSEN SYSTEM When the DabWiFi6 tuner’s location in the Bang &...
Some Bang & Olufsen devices only have a single input socket. This socket might be activated via other commands than y / b. In these cases, the personality of the DabWiFi6 can be changed for it to power up on the suitable command like AAUX, CD or other else.
BeoSound, BeoCenter, BeoMaster or a BeoVision TV and is controlled with a Bang & Olufsen remote. DabWiFi6 may also be connected to equipment of all other brands, but it can only be controlled with a Bang & Olufsen remote.
CONNECTIONS ANTENNA CONNECTION The OneRemote DabWiFi6 tuner needs an antenna signal of sufficient strength and quality. If both DAB and FM channels are received the antenna shall provide a signal containing both frequencies. • If the FM signal does not provide a sufficient strength the reception is noisy and very poor.
Option programming of the DabWiFi6 tuner is only required during the initial installation. A Bang & Olufsen remote is used for this programming activity. Programming the DabWiFi6 with one or more options makes the DabWiFi6 fit the actual Bang & Olufsen system that it is now a part of.
Direct L410w VMEM, VTAPE Cable L112w VAUX Direct L412w VAUX Cable L116w DTV, SATELLITE Direct L416w DTV, SATELLITE Cable Direct: B&O remote control must be pointed towards the DabWiFi6. Cable: B&O system delivers control data via the audio cable. www.oneremote.dk...
Enable Blue light. CONNECT THE DABWIFI6 TUNER TO BEOLAB 3500 A BeoLab 3500 in a link system may access a DabWiFi6 tuner connected to a Bang & Olufsen radio or TV in the same link system. As an example, the DabWiFi6 tuner may be connected to an ATAPE input socket on a radio or a VAUX socket on a TV.
One Remote DabWiFi6 tuner should be. The OneRemote DabWiFi6 tuner must be programmed with the correct option to operate in the actual Bang & Olufsen environment.
RCA IN Use a OneRemote adaptor cable, BEOSOUND 4 type 39207438. The DabWiFi6 may be added as an audio MasterLink source in a MasterLink system. If the MasterLink socket in a BeoSound 4 is vacant, the DabWiFi6 may be added via a BeoLink Converter 1611 and controlled as described below.
Input Socket Source selected with B&O Remote. Remarks BEOSOUND OUVERTURE If the MasterLink socket is not in use, the DabWiFi6 Masterlink tuner might be connected and operated via a BeoLink Converter, using this socket. The DabWiFi6 can then be accessed using or another video source.
Source selected with B&O Remote. Remarks BEOMASTER 3500 4500 See the chapter ”Advanced connection to AUX/TV socket”. B&O Device Input Socket Source selected with B&O Remote. Remarks BEOMASTER 5500 AUX/ TV See the chapter ”Advanced connection to AUX/TV socket”. www.oneremote.dk...
B&O Device Input Socket Source selected with B&O Remote. Remarks PHONO BEOCENTER 9300 TAPE2 AUX/ TV See the chapter ”Advanced connection to AUX/TV socket”. www.oneremote.dk...
This is an advanced setup that might calls for a technician. The DabWiFi6 must then be option programmed as a video personality, i.e. a. The chosen video source must be one not used by other B&O devices in the room! B&O Radio in Option 1...
Use a OneRemote adaptor cable, type 39207438. uand other audio sources. If the MasterLink socket is not Masterlink used, the DabWiFi6 tuner might be connected and operated via a BeoLink Converter. See page xx for details on connection of the BeoLink Converter 1611.
B&O Device Input Socket Source selected with B&O Remote. Remarks The input is a scart socket, a 21 Scart pin AV socket. Use a OneRemote BEOVISION TV’S adaptor cable, type 39207496. AV1 - AV6 DECODER input B&O TV models cannot be used !!!
BEOLINK CONVERTER 1611/ 1612 The OneRemote DabWiFi6 tuner may be connected to a Bang & Olufsen stand-alone radio or TV, via a BeoLink Converter using MasterLink and the AAL inputs. Included in the MasterLink system DabWiFi6 connected with BeoLink Converter Both B&O Radio and B&O TV.
DabWiFi6 tuner may be connected to the Converter’s AAL input socket. Programmed as a video source like v, T, a, d, f, s. The DabWiFi6 tuner may then be controlled with the B&O radio’s remote. BeoLink Converter 1611 or 1612 used with a Bang & Olufsen audio...
BEOLINK ACTIVE – CONNECTION VIA A BEOLINK ACTIVE IN ANY LINK ROOM CONNECT THE DABWIFI6 TUNER VIA THE PC INPUT SOCKET The OneRemote DabWiFi6 tuner may be connected to a Bang & Olufsen BeoLink Active with a vacant ‘PC’ socket.
The latest Beo4 version has the Pfunction as a small Joystick. If the B&O remote does not have a O key or a small joystick, the DabWiFi6 is controlled in accordance with the table ”Older Bang & Olufsen Remotes” in the User Guide.