Cinema Mode; Dnr; Mpeg Nr; Cti - Toshiba 22SL700A Owner's Manual

Cinema Mode

The frame rate of a movie film is generally 24 frames a
second whereas the movie software such as DVD, etc.
that you enjoy watching on television at home is 30 or
25 frames a second. The difference in frame rate may
cause flickers whilst viewing the films on television; set
the Cinema Mode to convert the signal to reproduce a
smooth motion and picture quality.
1. In the PICTURE menu, press ▲ or ▼ to highlight
Advanced Video, press ► or
PICTURE
Picture Mode
Brightness
Contrast
Colour
Tint
Sharpness
Back Light
Picture Size
Colour Temperature
Advanced Video
Enter Select
OK
2. Press ▲ or ▼ to highlight Cinema Mode, press ◄
or ► select On or Off.
Advanced Video
Cinema Mode
NR

CTI

Adaptive Luma Control

Active Backlight

Blue Screen
3D Colour Management
Base Colour Adjustment
Select

DNR

DNR (Digital Noise Reduction) enables you to 'soften'
the screen representation of a weak signal to reduce the
noise effect.
1. In the PICTURE menu, press ▲ or ▼ to highlight
Advanced Video, press ► or
2. Press ▲ or ▼ to highlight NR and then press ► or
to select.
3. Select DNR. Press ◄ or ► to select Low, Middle,
High, Auto, or Off.
DNR

MPEG NR

Select
Using the TV's features (General)
to select.
User
50
95
50
0
50
60
Wide
Back Exit
RETURN EXIT
On
Auto
7
On
Off
Off
Back Exit
RETURN EXIT
to select.
NR
Auto
Low
Back Exit
RETURN EXIT
MPEG NR
If the receiving signal of MPEG is a grained noise
depending on the compression and conversion, the noise
may be reduced when using this function.
1. In the PICTURE menu, press ▲ or ▼ to highlight
Advanced Video, press ► or
2. Press ▲ or ▼ to highlight NR and then press ► or
to select.
3. Select the MPEG NR, and press ◄ or ► to select
Low, Middle, High, or Off.
DNR
MPEG NR
Select
CTI
The colour transient improvement (CTI) involves the
detection and sharpening of edges around colour objects
on the screen.
1. In the PICTURE menu, press ▲ or ▼ to highlight
Advanced Video and press ► or
2. Select the CTI, and press ◄ or ► to select Auto
or Off.
Adaptive Luma Control
Automatically adjusts the brightness and contrast after
analyzing the input signal. This function enriches the
colours and the depth of the picture.
1. In the PICTURE menu, press ▲ or ▼ to highlight
Advanced Video and press ► or
2. Press ▲ or ▼ to highlight Adaptive Luma Control
and then press ◄ or ► to select from 0 ~ 10.
Active Backlight
When Active Backlight is activated, it will automatically
optimise the backlighting levels for dark scenes.
1. In the PICTURE menu, press ▲ or ▼ to highlight
Advanced Video and press ► or
2. Select the Active Backlight, and press ◄ or ► to
select On or Off.
to select.
NR
Auto
Low
Back Exit
RETURN EXIT
to select.
to select.
to select.
23