Related Manuals for Ryobi RHT1850Li15
Summary of Contents for Ryobi RHT1850Li15
- Page 1 ORIGINAL INSTRUCTIONS 18V ONE+ Cordless Hedge Trimmer RHT1850Li15 RHT1850Li13 CHT1850...
- Page 2 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications.
- Page 3 Fig. 1 Fig. 2 Fig. 3...
- Page 4 Fig. 4 Fig. 5 Fig. 6 Fig. 7...
- Page 5 Fig. 8 Fig. 9 Fig. 10...
-
Page 6: Rules For Safe Operation
Safety ■ Dress properly. Do not wear loose clothing or RULES FOR SAFE OPERATION jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair WARNING can be caught in moving parts. If devices are provided for the connection of dust ■... -
Page 7: Special Safety Warnings
Safety ■ operate power tools explosive SPECIAL SAFETY WARNINGS atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks WARNING which may ignite the dust or fumes. To avoid the risk of electric shock, do not operate ■... - Page 8 Safety ■ Before starting the unit, make sure the cutting SERVICE blades will not come in contact with anything. If ■ Service on unit must be performed only by qualified the machine strikes or becomes entangled with foreign repair personnel. Service or maintenance performed objects, stop the unit immediately, remove the battery by unqualified personnel could result in a risk of injury pack and check for damage.
-
Page 9: Transporting Lithium Batteries
Safety 22. Guard Blade TRANSPORTING LITHIUM BATTERIES FIG. 10 Transport the battery in accordance with local and national provisions and regulations. 1. Blade Cover Follow all special requirements on packaging and labelling when transporting batteries by a third party. Ensure that OPERATION no batteries can come in contact with other batteries or conductive materials while in transport by protecting... -
Page 10: Maintenance And Repair
■ Apply suitable grease to yoke & cams. Use a clean cloth to remove dirt, oil,grease, etc. When servicing use only identical Ryobi replacement parts. ■ Install the blade cover plate (23) using the 4 blade cover Use of any other parts can create a hazard or cause screws. -
Page 11: Blade Care
Safety BLADE MAINTENANCE – HEDGE TRIMMER under normal operating procedures. Therefore, no further lubrication is required. WARNING WARNING Battery units do not have to be plugged into an electrical Do not attempt to modify this unit or create or mount any outlet;... -
Page 12: Environmental Protection
Safety The following signal words and meanings are intended ENVIRONMENTAL PROTECTION to explain the levels of risk associated with this product. Recycle raw materials and waste electrical SYMBOL SIGNAL MEANING products instead of disposing of as waste. The machine, accessories and packaging Indicates an imminently should be sorted for environmental-friendly hazardous situation, which,... -
Page 13: Product Specifications
PRODUCT SPECIFICATIONS RHT1850Li15 / Model RHT1850Li13 / CHT1850 Voltage 18 volts No-load speed 1,200 min Blade length 457 mm Cutting capacity 10 mm : 71 dB(A), Measured sound pressure level : 3.0 dB(A) : 91 dB(A), Measured sound power level : 3.0 dB(A) - Page 14 Techtronic Industries (Australia) Pty. Ltd. Level 1, 660 Doncaster Road Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd. 18-26 Amelia Earhart Avenue Mangere, Auckland 2022, New Zealand 960088171-02...