Page 1
ORIGINAL INSTRUCTIONS Cordless Hedge Trimmer RHT1840Li20 OHT1840...
Page 2
Important! It is essential that you read the instructions in this manual before assembling, operating, and maintaning the product. Subject to technical modification.
Safety, performance, and dependability have been given shock top priority in the design of your cordless hedge trimmer. ■ If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of INTENDED USE electric shock.
■ Maintain power tools. Check for misalignment or CORDLESS HEDGE TRIMMER SAFETY WARNINGS binding of moving parts, breakage of parts and any ■ Keep all parts of the body away from the cutter other condition that may affect the power tool’s blade.
■ Do not use the product when you are tired, ill, or under TRANSPORTATION AND STORAGE the influence of alcohol, drugs, or medication. ■ Stop the product, remove the battery, and allow both to ■ Keep firm footing and balance. Do not overreach. cool before storing or transporting Overreaching can result in loss of balance and can ■...
Page 6
Lubricate the blades lightly before use if necessary using above method. (Warranty-approved WHAT'S IN THE BOX lubricants: WD-40, INOX, and RP7). RHT1840Li20/OHT1840 ■ Check all nuts, bolts, and screws at frequent intervals ■ Hedge trimmer x1 for proper tightness to ensure the product is in safe ■...
Regulatory Compliance Mark (RCM). This product meets applicable regulatory requirements. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. SYMBOLS IN THIS MANUAL Parts or accessories sold separately Note Warning...
Page 8
WHAT'S IN THE BOX RHT1840Li20 *Kit includes battery and charger.
Page 9
WHAT'S IN THE BOX OHT1840 *Battery and charger are sold separately.
OPERATION During use, the operator must always have both hands on the triggers. Never touch or put your bare hands near the blade as they are very sharp and could cause injury.
Page 14
MAINTENANCE - CLEANING YOUR TOOL Remove battery. Use a brush to wipe off excess materials. Apply warranty approved cleaning lubricant.
PRODUCT SPECIFICATIONS VIBRATION LEVEL Cordless Hedge Trimmer WARNING Model RHT1840Li20/OHT1840 The declared vibration value has been measured with a standard test method and may be used to compare one Voltage 18 volts DC tool with another. No-load speed 1500 rpm...
Page 17
Imported by: Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia Techtronic Industries N.Z. Limited 2 Landing Drive, Mangere Auckland, 2022, New Zealand 960737050-01...