To Use Napper Bar; Seat Back Positions; To Secure Child With Harness - Century 4-in-1 system Instruction Manual

To Use Napper Bar

Stroller may be used with or without napper bar in the use
position.
Napper bar has two (2) positions: use and stowed.
1
For use (up) position:
• Push napper bar into slots.
Pull on napper bar to be sure it is
securely locked .
2
For stowed (down) position:
• Push napper bar release buttons on
sides of fold locks.
• Pull napper bar out until it stops. Allow
napper bar to drop on to seat.
• Partially fold stroller to allow napper bar
to drop under seat.

Seat Back Positions

Seat Back Positions
Seat back has two (2) positions: upright and reclined.
1
For upright position, lift seat back forward until
back support pins hook into seat back latches.
2
For reclined position, release both levers on
sides of seat back.
STROLLER USE continued

To Secure Child With Harness

WARNING
Avoid serious injury from falling or sliding out:
• Always use waist and crotch straps to restrain child, even
when sleeping.
• To prevent child from standing or sliding out of stroller, be
sure waist and crotch straps are SNUG and do not slip
loose.
• Periodically check waist and crotch straps to be sure they
are snug around child.
Secure child with harness system:
• Pull waist straps around child's
waist.
• Place crotch strap between child's
legs.
• Snap both buckle tongues into
buckle.
Adjust harness system:
• Adjust length of waist straps by pulling slider rings (A)
and ends of waist straps (B) .
• Adjust length of crotch strap by pulling slider ring (C) .
• Pull on straps to be sure they are buckled and snug.
A
B
A
B
C
8