Maintenance; Cleaning; To Remove Front Wheel Assembly; To Remove Rear Wheel Assembly - Century 4-in-1 system Instruction Manual

Cleaning

• Wipe fabric and frame with damp cloth and mild soap. DO
NOT USE abrasives, solvents, strong detergents, or
household cleaners: they can weaken plastic.
• DO NOT machine wash or dry seat pads that have boards
in them.
1
Remove screws and unwrap straps
securing seat pad to frame.
2
When re-attaching seat pad, wrap seat
strap around frame and insert screw.
• Comfort pad is removable and machine washable. Machine
wash in cold water, machine dry on cool setting to prevent
shrinkage. DO NOT wash with other clothes.
• When replacing comfort pad, make sure all waist and crotch
straps are rethreaded through slots in comfort pad.
• Loop front of comfort pad over leg rest and refasten
attachment strips.
WARNING
To avoid serious injury to child, periodically check
anchoring straps beneath seat pad to ensure they are
secured to frame.

MAINTENANCE

To Remove Front Wheel Assembly

Push tab away from leg while pulling
down on wheel assembly.

To Remove Rear Wheel Assembly

Pry wheel retainer and cap off axle.
Slide wheel off end of axle.

Dented Wheels

Sometime wheels become "dented" from shipment or from
normal use. You may try the following procedure for repairing
the dented wheel before calling our Consumer Relations
Department.
• Blow warm air from hair dryer over dented area for 1 to 3
minutes.
10