What To Do If; Technical Data - IKEA LAGAN HGC3K User Manual

ENGLISH
Removing the residues and stubborn
residues:
1. Food containing sugar, plastics, tin foil res-
idues should be removed at once, best tool
for cleaning glass surface is a scraper (not
included with the appliance). Place a scra-
per on the glass ceramic surface at an an-
gle and remove residues by sliding the
blade over the surface. Wipe the appli-

What to do if...

Problem
The cooking zones are not
functioning.
The residual heat indicator is
not displaying anything.
If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a sol-
ution to the problem yourself, contact your
dealer or the After Sales Service.

Technical data

Rating Plate
Made in Germany
© Inter IKEA Systems B.V. 1999
501.823.52
21552
PQM
The graphic above represents rating plate of
the appliance (without serial number which is
generated dynamically during the production
process), which is located at its underneath
surface of the casing.
2. Limescale rings, water rings, fat splashes,
Possible cause
The desired heat setting is not
set.
The fuse in the house electrical
installation (fuse box) has
been tripped.
The cooking zone was only on
for a short time and is there-
fore not hot.
registered engineer, the visit from the customer
service technician or dealer may not take
place free of charge, even during the warranty
period.
Model LAGAN HGC3K Typ 58PEE01A0 5.3kW
PNC 949 593 369 00 S NO ................ 220V-240V AC 50-60 Hz
Dear Customer, please apply here aside the
sticker you can find in the dedicate plastic bag
inserted inside the hob packaging. This will al-
low us to assist you better, by identifying pre-
cisely your hob, in case you will need in future
our assistance. Thank you for your help!
ance with a damp cloth and a little washing
up liquid. Finally, rub the appliance dry us-
ing a clean cloth.
shiny metallic discolorations should be re-
moved after the appliance has cooled
down using cleaner for glass ceramic or
stainless steel.
Remedy
Set the heat setting.
Check the house electrical in-
stallation fuse. If the fuses trip
a number of times, please call
an authorized electrician.
If the cooking zone is sup-
posed to be hot, call the After
Sales Service.
If you operated the appliance wrongly, or
the installation was not carried out by a
7
230 V
DGT