Hotpoint HUE62X S Instructions For Installation And Use Manual page 12

Electronic Clock & Automatic
Cooking Feature
STEP 6. Press the Time/Mode button, until the ‚end
time' symbol is flashing. The display will
GB
show a default cooking end time (this
will be the current time plus the cooking
duration you set in STEP 5). The ‚end
time' symbol will flash.
STEP 7. Turn the +/- control knob to set the time
you wish the cooking to end. After a
few seconds the display will show the
temperature, cooking duration and end
time in turn.
THE COOKING DURATION AND END TIME IS NOW
SET.
The display will show the temperature and cooking
duration when the programme has started.
Main Oven
Light
At the end of the cooking duration, ‚End' and the
‚cooking duration' symbol will show in the display and
an audible tone will be heard for a few seconds.
Turn the main oven control to ‚O', the OFF position to
switch the oven off. The display will revert back to the
time of day.
To cancel the automatic mode at any time turn the
main oven control to ‚O', the OFF position.
Note: At any time up to the start of cooking,
the cooking end time, cooking duration and the
temperature will be shown in the display.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
12
Time/Mode
+
-
This product complies with the requirements of the
latest European Directive on the limitation of power
consumption
by the use of an Automatic 'Stand-by' mode.
Full 'Standby' is achieved when both:
The Oven is not in Use::
If the ovens are NOT in use, and the oven
controls have not been operated for a
period of approximately 2 minutes, the timer
display automatically switches to its 'stand-by'
mode. When in 'standby mode', the time of day is
not visible and just the "watch icon" is illuminated
on the timer display. As soon as interaction with
the oven controls, or with any of the timer buttons
resumes, the full timer display, (including the 'time
of day'), will be restored and the 'watch icon' will
go out
AND
The Hob is not in Use:
If no operations of the hob controls are carried
out for a period of a few minutes after all hotplates
have been turned off , and once the hob has cooled
sufficiently, the "hot hob indicators" on the hob
glass go out, indicating that the hob is in '' stand-
by mode".
When any of the hotplates are next used, the
appropriate hob hot light(s) will be illuminated
again. Operation of the hob controls does not affect
the timer display