Honeywell 36 Owner's Manual page 26

IMPORTANT
If the Hold needs to be canceled
before the designated time, press
Run
to return to your program.
Program
Using Daylight Savings Time Feature
This feature allows you to change in and out
of Daylight Savings Time with a key press.
Daylight
When is pressed in the fall, the time
Time
will go back one hour. In the spring, the time
will go ahead one hour and the display will
show DST. See Setting the Current Day and
Time section for initial setting instructions.
NOTE: Pressing
within a five minute period will scroll
you through various time options
(Example: one hour earlier or later
with or without DST). Pressing
Daylight
six times in a five minute
Time
period will return you to your original
settings.
Daylight
more than once
Time
Using Usage Feature
Press once to display the minutes
Usage
that the heating or cooling system has been
operating for the current day. Press
second time, within 10 seconds, to display
the system operating time for the previous
day (midnight to midnight). Press
third time, within 10 seconds, to display the
system operating time since the last time the
usage function was cleared.
NOTE: Press
the usage function.
26
Usage
Usage for 3 seconds to clear
69-0939—1
a
Usage
a