Honeywell 36 Owner's Manual page 25

Changing Temperature Setting Indefinitely
Move the System switch to heat or cool.
Press then
Hold Temp
your setting, if desired. (The display changes
from the setpoint to the room temperature
after approximately 3 seconds.) Anytime you
want to cancel the Hold, press
Changing Temperature Setting Until A
Designated Day And Period
Move the System switch to heat or cool.
Press twice then
Hold Temp
desired number of days is displayed
(1 to 255 days). (Example: 18 = Hold will
override the daily programs for 18 days.)
Press Morning , Daytime
select the period your program will restart.
or key to change
Run
.
Program
Time
keys until the
, or
Evening Night
(Example: Evening = thermostat will stop the
Hold at the Evening period start time.)
Press or
setting, if desired. (Example: Heat 54° =
heating equipment will operate when the
room temperature is below 54°F.)
NOTE: In this example, your thermostat
uses the Hold setting for eighteen
days and returns to the daily
programs at the Evening period start
time. Your heating temperature
setting is 54°F. Only the heating
temperature is used because the
System is set for Heat.
to
25
key to adjust the temperature
69-0939—1