Table of Contents
Advertisement
Installation
Check the measurements on
Fig.3 to confirm the requirements
for your installation. Please note,
the oven dimensions show a
standard CDA oven and will vary
20-24
depending on the appliance
594
being installed above the
573
warming drawer.
598
128
131
537
1. Run the mains lead to the
switched fused spur outlet to be
595
592
548
510
used and connect to the mains
23
25
6
electrical supply. Do not switch
. 3
Fig. 3
on until installation is complete.
2. Locate the product centrally on the supporting shelf and fix into
position using the fixing screws supplied.
3. Carefully fit the appliance on top of the warming drawer, taking
care not to scratch the top stainless edge of the drawer unit.
Ensure that the mains connection lead is located near to the power
outlet to avoid having to remove the product again to connect the
mains electrical supply.
4. Secure the oven into the housing using appropriate fixing screws.
The casing of this appliance will get hot. Ensure that any cables that
11
Advertisement
Table of Contents
