Table of Contents
Advertisement
Installation
Check the measurements on Fig.
1 to confirm the requirements for
your installation. Please note,
the oven dimensions show a
19
CDA compact oven and will vary
depending on the appliance
455
432
being installed above the
warming drawer.
132.5
595
555
1. Run the mains lead to the
595
560
switched fused spur outlet to be
21.5
used and connect to the mains
electrical supply. Do not switch
8.5
on until installation is complete.
Fig. 1
2. Locate the product centrally on the supporting shelf and fix into
position using the fixing screws supplied.
3. Carefully fit the appliance on top of the warming drawer, taking
care not to scratch the top stainless edge of the drawer unit.
Ensure that the mains connection lead is located near to the power
outlet to avoid having to remove the product again to connect the
mains electrical supply.
4. Secure the oven into the housing using appropriate fixing screws.
The casing of this appliance will get hot. Ensure that any cables that
11
Advertisement
Table of Contents
