Installation - CDA VW141 Manual

Installation

Check the measurements in fig. 4 to confirm the requirements for your
installation. Please note, the oven dimensions show a standard CDA
oven and will vary depending on the appliance being installed above
the warming drawer.
1. Connect the mains lead to the product before installation. Run
the lead to the power outlet to be used and connect to the mains
electrical supply. Do not switch on until installation is complete.
2. Locate the product centrally on the supporting shelf and fix into
position using the fixing screws and plastic supports (Fig. 3).
3. Carefully fit the appliance on top of
the warming drawer, taking care not
to scratch the top stainless edge
of the drawer unit. Ensure that the
mains connection lead is located
near to the power outlet, to avoid
having to remove the product again
to connect the mains electrical
supply.
4. Secure the oven into the housing
using appropriate fixing screws.
Fig. 2
Fig. 3
9