1. Manuals
  2. Brands
  3. Great Outdoors Manuals
  4. Grill
  5. A05714W
  6. Assembly and owner's manual

Great Outdoors A05714W Assembly And Owner's Manual

X-series portable gas grill
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
the
Great Outdoors
Assembly and
Owner's Manual
A05714W
X-Series
Portable
Gas Grill
ASSEMBLER / INSTALLER:
Leave these instructions with the consumer.
CONSUMER / USER:
Read all of these instructions and keep them in a safe place for future reference.
FOR YOUR SAFETY
If you smell gas:
1
Shut off gas to the appliance.
2
Extinguish any open flame.
3
Open lid.
4
If odor continues, immediately call
your gas supplier or fire department.
FOR YOUR SAFETY: Never leave a grill unattended when in use.
FOR YOUR SAFETY
1
Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
2
An unconnected liquid propane
cylinder should not be stored in the
vicinity of this or any other appliance.
®
L.P. Gas
Cylinder
Not Included

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A05714W and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Great Outdoors A05714W

Summary of Contents for Great Outdoors A05714W

  • Page 1 Great Outdoors ® Assembly and Owner’s Manual A05714W X-Series Portable Gas Grill L.P. Gas Cylinder Not Included ASSEMBLER / INSTALLER: Leave these instructions with the consumer. CONSUMER / USER: Read all of these instructions and keep them in a safe place for future reference.

  • Page 2: Table Of Contents

    Table of Contents Page Number Chapte r 1 - INSTALLATION Necessary Information ......Choosing a Safe Location ......Portable L.P.

  • Page 3: Chapte R 1 - Installation

    X-Frame Model Series Gas Grill Installation Chapter Necessary Information to · Operating this or any gas-fired appliance in an enclosed area can produce a build-up Safely Use a Gas Grill of carbon-monoxide, which could result in injury or death. 2. Installation must conform with local The gas fuel used by this product is codes or, in the absence of local codes, with...

  • Page 4: Portable L.p. Gas Grills

    9. Make sure that the drip pan is in place under the grill bottom. · Hot drippings from cooking food could damage the fuel supply system. IMPORTANT: NEVER leave a grill unattended when in use. Portable L.P. Gas Barbecue Grills WARNING: Do not use natural gas in an appliance designed for L.P.
  • Page 5 4. The pressure regulator and hose assembly provided is factory set at an outlet Dual Burner pressure of 11 inches water column (.4 lb. Fuel-Control Valve per sq. Inch). WARNING: Any attempt to adjust the Type 1 Fuel Valve regulator is dangerous and could create a Regulator Orifice situation causing personal injury or property...
  • Page 6 The L.P. gas cylinder must have a shut-off Have the gas dealer weigh the cylinder valve terminating in a Type 1 L.P. gas- after filling to ensure that the cylinder is not cylinder-valve outlet. A Type 1 compatible overfilled. cylinder with a Type 1 cylinder valve has a positive seating connection that does not DANGER: permit gas flow until a positive seal has been...
  • Page 7 Take These Instructions to the L.P. Gas Dealer When using a cylinder exchange, be sure the The L.P. gas cylinder has a Type 1 cylinder exchanged cylinder is a Type 1 cylinder; a 510 valve with a back-check module in its outlet POL cylinder will not fit a Type 1 regulator.

  • Page 8: Chapter 2 - Assembly Instructions

    X-Frame Model Series Gas Grill Assembly Instructions Chapter Getting Started 1. Please follow the steps in the order that they are presented. 2. Assemble the grill where you plan to use 3. You may want to place an old towel or cloth at the assembly site to prevent nuts and bolts from becoming lost.
  • Page 9 Assembly Step 1 - Identifying the Grill Parts Locate these parts: Warming Rack Note: Refer to the parts listing on page 32 of the Grill Head manual for replacement part Assembly Cooking Grids information. Handle Heat Shield Lid Handle Sideburner Table Heat Assembly...
  • Page 10 Assembly Step 2 - Attach Legs to X-Frames Tools Needed: LOCATE THESE PARTS: X-Frame X-Frame Phillips head screwdriver with Control ”A” USE HARDWARE Panel 2 Left M6x15mm M6 Flat Legs Bolt (8) Washer (8) 2 Right Legs Attach the leg to the X-frame by inserting the top tabs into the corresponding slots in the X-frame as shown.
  • Page 11 Assembly Step 3 - Attach the Feet Tools Needed: LOCATE THESE PARTS: Left Foot Wheel (tank side) Phillips head screwdriver Wheel Washer Axle 17mm Wrench Axle ”B” USE HARDWARE Right Foot M6 Flat Wheel M10 Axle M6x15mm Washer(2) Nut (2) Bolt (8) Washer (8) Assemble the wheels and axle to the...
  • Page 12 Assembly Step 4 - Install the Tank Retainer Tools Needed: ”C” USE HARDWARE Phillips head screwdriver LOCATE THESE PARTS: M4 Wing M4x10mm M6 Wing Nut (1) Bolt (1) Nut (6) Insert the legs of the wire tank retainer Wire into the mounting brackets inside the grill X-Brace legs.
  • Page 13 Assembly Step 5 - Attach the Modesty Panel Tools Needed: LOCATE THESE PARTS: Phillips head screwdriver Tank 7mm Wrench Heat Shield ”D” USE HARDWARE M4 KEPS M4x15mm Nut (6) Bolt (6) Modesty Panel Position the modesty panel between the front legs of the assembly.
  • Page 14 Assembly Step 6 - Attach the Side Tables Tools Needed: LOCATE THESE PARTS: Left Sideburner Table Assembly 10mm Wrench ”E” USE HARDWARE Right Side Table Assembly M6x10mm Bolt (8) Left Sideburner Table Assembly Start with the side burner table (left side).
  • Page 15 Assembly Step 10 - Installing the Grids LOCATE THESE PARTS: Heat Plate Cast Iron Sidetable Cooking Grids Storage Bin (Left) (Right) No tools are required for this step. Set the Heat Plate into the tub as shown. It will rest on the lowest ledge inside the tub, just above the burner.
  • Page 16 Assembly Step 11 - Install the Warming Rack No tools are required for this step. LOCATE THESE PARTS: Position the warming rack as shown and insert one end of the rack into the lid as shown. Working on the same side of the grill, Warming Rack insert one foot of the warming rack into Assembly...

  • Page 17: Step 2 ( Attach Legs )

    Side Burner Operation STEP 5. If the burner fails to light properly, turn the burner control knob off. Also turn off the L.P. cylinder valve. Wait five minutes before attempting to light the burner again. This will allow time for released gas to disperse. HINT: If the burner does not light after trying again, turn off burner-control knob, the L.P.
  • Page 18 Model A05714W Replacement Parts Replacement parts are available direct from our date of purchase is required. Please call to receive a warehouse. Some components are not available return authorization number before returning any grill preassembled and may be ordered separately. For components.

Table of Contents