Battery - Hasselblad 503CW User Manual

Battery attachment/removal
As with all mobile digital products, it is essential that you maintain
a check on battery condition. It is recommended that you have a
fully-charged reserve battery with you at all times when not tethered
to a computer.
The Battery Pack F-570 CFV (3051094) is the recommended power
source for the Hasselblad 503CWD and Hasselblad CFV (all models).
It is a rechargeable and environmentally approved Li-ion type.
Battery Charger 8.4V CFV
The Battery Charger 8.4V CFV (3051092) is designed for use with
the Battery Pack F-570 CFV only. It is supplied with four plug at-
tachments; three to suit various types of domestic power-sockets
available worldwide and one to suit automobile power-sockets.
Other types of domestic power sockets will require a domestic socket
converter to accept the plug attachments supplied.
The Battery Pack F-570 CFV and the Battery Charger 8.4V CFV may
be supplied bundled as (3051096).
Plug attachments
Domestic plugs: Choose a suitable plug attachment to match the
power-socket type. Ensuring that the securing catch (A) is correctly
oriented as in the illustration, slide the plug attachment into posi-
tion onto the charger unit. Continue pushing the plug attachment
B
A
in the same direction until clicks into place. The plug attachment is
now automatically secured by the securing catch.
To remove a plug attachment, depress the top (B) of the securing
catch to release it while simultaneously sliding the plug attachment
in the reverse direction to fitting.
Automobile plug: Insert the DC power plug (C) into the 12-24v input
socket (D) on the charger unit.
C
Battery charging
F
Domestic plugs: Insert the battery charger into a standard (100–240V~
/50–60 Hz) domestic socket.
D
Automobile plug: Insert the plug unit (E) (suitable for 12v/24v systems
E
only) into a power/cigarette lighter socket in an automobile. Ensure
that the indicator lamp (F) is illuminated.
Battery attachment/removal
Firstly, ensure the orientation of the CFV battery 7.2v is correct (with
G
the connectors (G) toward the top of the Battery charger CFV, as in
the illustration). Place the battery down onto the charger, leaving a
small gap as in the illustration. Slide the battery upwards ensuring
that prongs (H) on the charger enter the connectors on the battery.
Remove the battery by sliding it back downwards.
H
34