Power Indicator; Lock Button - Hasselblad 503CW User Manual

Power indicator

Glows orange to indicate that the CFV is busy. Glows green when
it is ready.

Lock button

Locks back into place on camera.
Digital back retaining hook slots
Accepts digital back/magazine retaining hooks on camera body.
CCD and IR filter
This is the light-sensitive element, which is positioned behind a
permanently mounted IR filter. Usually, this assembly will either
be inside the camera or protected by the cover. Always be very
careful not to touch or scratch the surface of the filter when it is
exposed and to replace the protective cover whenever the CFV is
not mounted on a camera.
Databus connectors
For communicating with a Hasselblad ELD model camera body
or with a modified Hasselblad 202/203/205 model camera body.
Battery (not supplied)
7.2V InfoLithium L type (Sony NP-F550 or similar)
Zoom-in button / SELECTION (+ button)
Zoom-in button (to make the view larger) for the preview
image. Also acts as a selection button when viewing avail-
able image batches, media and value setting on the menu.
Zoom-out button / SELECTION (– button)
Zoom-out button (to make the view smaller) for the pre-
view image. You can continue to zoom out to view several
small images at once and finally to view and select batches and
media. Also acts as a selection button for value setting on the menu.
Instant Approval / (OK) button
This button steps through the three approval levels,
thereby assigning an approval status to the image cur-
rently displayed (or selected) in the preview screen (part of the
Instant Approval Architecture system). The color coding is based
on the traffic signal convention of green, amber (yellow) and red.
Also acts as a confirmation button (OK button) for some types of
menu operations, such as deleting images; indicated by a label
beside the button on the preview screen.
6 Navigation button
A four-way rocker button enabling you to step through
preview images and navigate the menu system. To
use it, press the side of the button that corresponds to
what you wish to do (e.g., move up, left, right or down).
7
Ventilator
Ensures the processor is kept cool.
8
Flash sync IN terminal
Used when working with studio / strobe flash units. Allows connec-
tion to the unit via the flash sync protector cable to ensure correct
9
syncronisation as well as providing protection for the CFV.
Flash sync OUT terminal
Used when working with studio / strobe flash units. Allows con-
nection to the lens sync contact via the flash sync cable to ensure
correct syncronisation.
10 FireWire connector
Allows the connection to a computer. The CFV requires an 800 con-
necter whereas the computer can be either an 800 or 400.
Battery retaining catch
11
Ensures secure mounting of battery.
CF card slot cover
12
Protects card slot.
Winder / EL terminal
Terminal for connection to a Hasselblad CW winder or Hasselblad
EL model camera body. Requires the camera sync cable (supplied).
13
Digital back support slots
Accepts digital back/magazine support hooks on camera body.
N o t e
14
When you attach or remove
the CFV, be very careful not to
touch or scratch the glass IR filter
surface.
Always attach the protective
cover for transportation or
storage.
33
15
16
17
18
19
20
21
22
23
N o t e
IMPORTANT
Never attempt to remove the
glass IR filter – you will probably
ruin the sensor if you do so.
See the 'Cleaning' section for
details.