Entering Coordinates; Using Tracback - Garmin Road Tech Zumo 665 Owner's Manual

Where To?
• If the zūmo is in simulator mode,
touch Set Loc. to set your location
to the selected location. (See
42.)
• Touch to switch between a 3D
(three-dimensional) map and a 2D
(two-dimensional) map.
• Touch to rotate the viewing
angle in 3D view.
• As you zoom out, the map changes
to a digital elevation map showing
the contours of the area.
• Zoom far out to view a globe.
Touch and spin the globe to quickly
find different areas of the world.
NoTe: You can only see detailed map
information for areas for which you
have maps loaded on your zūmo.
16

Entering Coordinates

If you know the geographic
page
coordinates of your destination, you
can use your zūmo to navigate to
your destination using the latitude
and longitude coordinates (or other
coordinate formats). This can be
especially helpful when geocaching.
1. Touch Where To?
2. Touch Format
coordinate format for the type of
map you are using.
3. Touch a direction field to select a
new direction.
4. Touch a numeric field to enter the
coordinates, and touch Done.
5. After you have entered the proper
coordinates, touch Next.

Using TracBack

Use TracBack to retrace your current
track back to where you started.
1. Touch
2. Touch
3. Touch
> Coordinates.
to select the correct
®
Where To > TracBack
view your recent track.
Save to save the track to
your favorites.
go! to retrace your recent
path of travel.
Road Tech zūmo 665 Owner's Manual
™
to