Download Print this page

Unpacking The System; Connecting The Speakers; Placing The Speakers - JBL CONTROL ONE AW Owner's Manual

Control monitor all-weather speaker system

Advertisement

uNPACkiNg ThE sYsTEM

Carefully unpack the system. If you suspect damage from transit,
report it immediately to your dealer and/or delivery service. Keep
the shipping carton and packing materials for future use. Open the
package and verify the following contents:
Included
2 JBL Control One AW speakers
2 x wall-mount, rotatable brackets
(includes bar wrench and backup cords)
1 x Owner's Manual

PLACiNg ThE sPEAkERs

Determine where to place the speakers. The following figures show
two possible applications.
Application 1: Adding surround speakers to a home theater system.
Left Front
Channel
Left
Surround
Channel
Application 2: Adding speakers to remote locations in your home.
Left Front
Channel
Left Rear
Channel
2
Subwoofer
Right Front
Center
Channel
Channel
Couch
Right
Surround
Channel
Right Front
Channel
o
45
Center Rear
Right Rear
Channel
Channel

CONNECTiNg ThE sPEAkERs

Connect the speaker wire (included) to the push terminals on the
rear of the speaker (10). Please note that the speaker wire supplied
features a polarity stripe to help distinguish its two conductors. Use
this polarity stripe to ensure that you are connecting the positive (+)
terminal on the JBL Control One AW speakers to the positive (+)
terminal on the amplifier, and the negative (-) speaker terminal to the
negative (-) speaker terminal. It does not matter whether you use
the striped conductor for connecting the postive (+) terminals or the
negative (-) terminals.
WALL ANd sTANd PLACEMENT
Adjustable wall brackets are included for the JBL Control One AW
speakers. The included brackets are for wall-mounting only.
Ceiling-mounting of the JBL Control One AW speakers is not
recommended, regardless of the bracket used.
Wall-MountIng the SpeakerS uSIng Included Wall
BracketS
IMportant SaFetY note: proper selection of mounting
hardware not included herein, and proper assembly and
installation of brackets, in cluding, but not limited to, selection
of appropriate weight-bearing support and bracket use with
the specified speaker only is the exclusive responsibility of the
customer. Manufacturer disclaims any liability for the selection
of mounting hardware and/or bracket installation.
+
10

Advertisement

loading