General Information - Bradford White ELECTRIC WATER HEATER Instruction Manual

This water heater must be installed in accordance with local codes. In the
absence of local codes, install this water heater in accordance with national
or regional requirements.
The best efficiency and longest product life is obtained only when the water
heater is installed, adjusted and operated in accordance with these
Installation and Operating Instructions. The manufacturer will not be held
liable for damage resulting from alteration and/or failure to comply with these
instructions.
This water heater has been designed and listed for the purpose of heating
potable water. The installation and use of this water heater for any purpose
other than the heating of potable water may cause damage to the water
heater and create a hazardous condition.
Incorrect operation of this appliance may create a hazard to life and
property and may impair and shorten heater life.
Do not use this appliance if any part has been under water. Immediately call
a qualified service technician to inspect the appliance and to replace any
part of the control system which has been under water. Depending upon
individual circumstances, it may be necessary to replace the entire water
heater.
Make sure that the voltage being supplied to the water heater is according to
the voltage printed on the product rating plate.
Do not store or use gasoline or other flammable, combustible or
corrosive vapors and liquids in the vicinity of this or any other
appliance.
Before proceeding, please inspect the water heater and its components for
possible damage. DO NOT install any damaged components. If damage is
evident, please contact the supplier where the water heater was purchased
or the manufacturer listed on the rating plate for replacement parts.

GENERAL INFORMATION

CAUTION
DANGER
IMPORTANT
3