CDA HVN93 Manual For Installation, Use And Maintenance

Induction hob

Advertisement

Quick Links

HVN93 Induction Hob
Manual for Installation, Use and Maintenance
Passionate about style
Customer Care Department • The
Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
1
T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HVN93 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for CDA HVN93

  • Page 1 Manual for Installation, Use and Maintenance Passionate about style Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu...
  • Page 2 With regard to the compliance of the pacemaker or any potential incompatibility, you should obtain information from Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a fault with the manufacturer or your attending physician.
  • Page 3: Using Your Hob

    Using your Hob Using your Hob To switch the zone on • To switch the power on, touch and hold for approximately two seconds. The hob will beep and all four zone displays will show 0. Please note: If a power level is not set within twenty seconds, the hob will switch off automatically. To set the power level •...
  • Page 4: Timer/Minute Minder

    Timer/minute minder Safety key lock To prevent accidental use, the hob has a safety key lock which switches off the slider control temporarily or completely. The hob is equipped with a timer that allows a finish time to be set for the end of cooking on any zone, between a minimum of one minute and a maximum of 99 minutes.
  • Page 5: Efficient Use Of Your Hob

    2. Check that the mains supply has not been switched off. 3. Check that the fuse in the spur has not blown. In the event of a fault with the hob, please advise CDA Customer Care of any fault code shown on the display Contact CDA Customer Care A : Customer Care Department, The CDA Group Ltd, Harby Road, Langar, Nottinghamshire, NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu...
  • Page 6: Troubleshooting

    The safety key lock is on Switch off the safety key lock (see page 7) shows Should any error code other than those listed above show on the zone displays, contact CDA Customer Care for fast frying steaks assistance iMPORTANT - PLEASE NOTE: In the event of any breakage, crack or cracking – even minimal – of the vitroceramic glass,...
  • Page 7: Fitting The Hob

    Fitting the Hob Notes: • The hob is equipped with an anti-overheating safety device that can Unpacking the hob: be activated if the hob is installed over an oven that is not sufficiently Take care not to lose or mishandle any parts. ventilated.
  • Page 8: Mains Electricity Connection

    Mains Electricity Connection Warning! this appliance must be earthed We recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who will comply with the I.E.E. and local regulations. This appliance is intended to be connected to fixed wiring and is not suitable for connection to a 13a plug or 13a supply.
  • Page 9 Passionate about style Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu...

Table of Contents