Samsung SMT-i3100 Owner's Manual page 51

PAGE
This is the function used to make an announcement via the speaker of the phone.
Select the [SVC] soft button
1
press the [OK] button.
- Or in the standby mode, press the [5] [5] button-a
function code for paging - and select the [Call] soft
button. (In a general phone mode, just press the
function code.)
- If you enable this paging function to search for the
target person while making a call via a station line, the
current call from the station line is held automatically.
If you hang up after paging, the target party can
resume the held call by answering the Meet Me Page
function. For more information, see the PAGE
PICKUP section in the service menus.
- This paging function is available only for the general
phone mode.
Select a desired zone from the paging zone
2
[0]-[9].
- To use this paging function, the paging zones must be
defined in advance. For information on defining the
paging zones, consult your system administrator.
When a confirmation signal tone is heard, speak
3
to the handset, then the announcement is made
through the speakers of the extension phones
within a paging zone.
[PAGE] and
51
SMT-i3100 User Guide _