Remote Control - Epson EH-TW9000W User Manual

Introduction

Remote Control

Button
a
Turns the projector on.
b
Turns the projector off.
c
The remote control buttons light up for ap-
proximately 10 seconds. This is useful when
operating the remote control in the dark.
d
Changes to the image from each input port.
s
The
TW9000W.
e
The
for HDMI Link.
With the other buttons, you can then start or
stop playback, adjust the volume, and so on
for connected equipment that meets the
HDMI CEC standards.
f
Changes between 2D and 3D.
g
Changes the Color Mode.
h
Set Super-resolution to reduce blurring in
areas such as the edges of the image.
s
i
Selects menu items and adjustment values.
s
j
When a menu is displayed, it accepts and en-
ters the current selection and moves to the
next level.
k
The adjustment value returns to its default
value when pressed while the menu's adjust-
ment screen is displayed.
l
Displays and closes the configuration menu.
On the configuration menu, you can make
adjustments and settings for Signal, Image,
Input Signal, and so on.
13
Function
p.23
s
p.24
s
p.24
button is only available for EH-
button displays the settings menu
p.51
s
s
p.39
p.56
p.56
s
s
p.56
s
p.43
s
p.29
p.56