Epson EH-TW9000W User Manual page 66

Configuration Menu
Function
Display Menu Position
Menu Color
Messages
Display Background Black, Blue, Logo
Startup Screen
Standby Confirma-
tion
Video Signal
Input Signal
Component
Language -
Reset Yes, No
*1 Only EH-TW8000 is displayed.
*2 Only EH-TW9000W/EH-TW9000 is displayed.
Menu/Settings
-
Color 1, Color 2
On, Off
On, Off
On, Off
Auto, NTSC,
NTSC4.43, PAL, M-
PAL, N-PAL, PAL60,
SECAM
Auto, YCbCr, YPbPr Sets the output signal for the video device con-
65
Explanation
Sets the position where the menu should be dis-
played.
Selects the color for the top menu.
•
Color 1: Black
•
Color 2: Blue
Sets whether or not to display the following mes-
sages (On or Off).
•
Item names for image signals, color modes, as-
pect ratios, and loading memory.
•
If the internal temperature is rising when no im-
age signal is being input or an unsupported sig-
nal is detected.
Selects the screen status when no image signal
is being input.
Sets whether or not to show a startup screen
when projection begins (On or Off). If changed,
this setting is enabled after you power off the
projector and the cool-down process is com-
plete.
Sets whether or not to display a standby confir-
mation message (On or Off).
Sets the signal type depending on the video de-
vice connected to the Video port. When set to
Auto, the video signal is set automatically.
If you notice noise in the image even when set to
Auto, or if you are not seeing any image at all,
select the correct signal type from the available
options.
nected to the Component port.
When set to Auto, the output signal is set auto-
matically. If you notice unnatural colors when set
to Auto, set the appropriate output signal from
the available options.
Selects the display language.
Resets all adjustment values for Extended to
their default settings.
p.24
s