Epson EH-TW9000W User Manual page 64

Configuration Menu
Function
Lock Setting Child Lock
Control Panel Lock
Projection Front, Front/Ceiling, Rear, Rear/Ceiling
2D-to-3D Conversion, 3D Format, 3D Depth, 3D Bright-
User Button
ness, Inverse 3D Glasses
Split Screen -
Menu/Settings
On, Off
On, Off
63
Explanation
This locks the button on the
projector's control panel to prevent
children from turning on the pro-
jector by accident. You can turn on
the power when locked by holding
down the button for approxi-
mately three seconds. You can still
turn off the device using the
button or the remote control as usu-
al.
If changed, this setting is enabled
after you power off the projector
and the cool-down process is com-
plete.
Note that even if Child Lock is set to
On, the projector still turns on and
starts projecting when the main
power switch is turned on if Direct
Power On is set to On.
When set to On, all buttons on the
control panel except for the
button are disabled.
played on the screen if any buttons
are pressed. To unlock, press and
hold the button on the con-
trol panel for at least 7 seconds.
If changed, this setting is enabled
once you close the configuration
menu.
Change this setting depending on
how the projector is installed.
•
Front: Select if you are projecting
in front of the screen.
•
Front/Ceiling: Select if you are
projecting in front of the screen
suspended from the ceiling.
•
Rear: Select if you are projecting to
a rear screen from the back.
•
Rear/Ceiling: Select if you are pro-
jecting to a rear screen from the
back when the projector is suspen-
ded from the ceiling.
Select the 3D Setup function you
want to assign to the
on the remote control. By pressing
the button, the assigned
menu item selection/adjustment
screen is displayed, allowing you to
make one-touch settings/adjust-
ments.
Starts split screen display.
is dis-
button
p.49
s