Jacuzzi J-315 Owner's Manual page 46

J-300 Series
1
PWR
SEL
8 9
6. DISP Button: Press DISP to switch between clock and station frequency.
When selected, the clock will display for 5 seconds then automatically
revert back to station frequency.
7. Source Button: Press Source to change input from audio or CD mode to
auxiliary mode. Press a second time to switch back. Note: Auxillary mode
(AUX) enables the external mp3 player mode. See section 17.1, page
details.
8. Volume Buttons: Press + (Volume Up) or - (Volume Down) to increase or
decrease volume level.
9. SEL Button: Press SEL to choose control function:
1) Bass
2) Treble
3) Balance
4) Fader
5) Volume
To adjust selection, press + (Volume Up) or - (Volume Down). Bass control:
Adjusts the amount of low frequency. Treble control: Adjusts the amount
of high frequency. Balance control adjusts the amount of sound output
to the left and right speakers. Fader control adjusts the amount of sound
output. You can decrease the sound level of the rear speakers by pressing
+ (Volume Up). To decrease the sound level of the front speakers press
- (Volume Down). Note: Bass and Treble settings are available only if EQ is
set to DSP Off.
10. Preset 1/Pause Play Button: In tuner mode, any station can be stored as
preset 1 by pressing and holding this button for 2 seconds. To recall the
station preset, simply press and release this button. In CD mode pressing
this button will pause or play the CD.
11. Preset 2/INT Button: In tuner mode, any station can be stored as preset
2 by simply pressing and holding this button for 2 seconds. To recall the
42
OPEN
MUTE
EQ/LD
AQUATIC
1
2
3
INT
RPT
10 11 12
4 5 6
A/PS
DISP
6
5
4
UP
DN
RDM
13 14 15
7
SOURCE
BND
16 17
48 for