IKEA RENGÖRA User Manual page 9

ENGLISH
How to adjust the level of the water
softener
1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to "Setting
and starting a programme".
2.
Press and hold, at the same time,
and until the indicators of
and start to flash.
3.
Press .
•
The indicators of
•
The indicator of
– The number of flashes of the end in-
dicator show the level of the water
softener.
E.g. 5 flashes + pause + 5 flashes =
level 5.
4.
Press button
change the setting.
5. Press the on/off button to deactivate the
appliance and to confirm the setting.
Filling the salt container
Caution! Water and salt can come out
from the salt container when you fill it.
Risk of corrosion. To prevent this, after the
replenishment, start a programme.
1
,
and go off.
continues to flash.
again and again to
2
3
Put 1 litre of water
in the salt container
(only for the first
time).
5
Filling the rinse aid dispenser
1
3
+ -
4
Put 1 kg of salt in
the salt container.
6
2
4
9