Table of Contents
Advertisement
1. How can I set factory default?
ANS:
1.
Unplug the power jack to turn off the power of P500/1500.
2.
Insert a pin into the reset hole as circled with red in the below figures. Sense a button and keep
it pressed until instructed to release.
3.
Plug in the power jack to turn on P500/1500, in about 20 seconds the network LED circled in
blue will be flashing
4.
Release the button (remove the pin from the reset hole).
5.
The P500/1500 should now be back to factory default. Have an access to the device by
changing to the attempt IP address from the default 192.168.0.200.
P500
P1500
55
Appendix C
FAQ
Advertisement
Table of Contents
