Table of Contents
Advertisement
DDNS Setup
Dynamic DNS Settings 1:
-
DDNS Enable: DDNS allows the dynamic IP address to be registered so others can connect to it by a domain
name. If you wish to use DDNS service and set to "ON".
-
Host Name: Assign a host name for the device, this name will be the domain name.
-
Port: Change the port if necessary.
-
DDNS Server: Input the domain name of the DDNS server.
-
Router Incoming Port: If the device is connected to a router, change the port to match the Port Forwarding setting
in the router.
-
Update Time: Set the interval time to detect the IP address and update to the DDNS server. The time setting must
be in the range 600~86400 seconds.
-
Response: After confirm the settings; a message will appear for check the DDNS status.
-
Apply: Confirm the settings.
43
Advertisement
Table of Contents
