Table of Contents
Advertisement
3. Network Configuration
IP Installer is a utility that provides an easier, more efficient way to configure the IP address and network
settings of the devices. It even provides a convenient way to set the network settings for multiple devices
simultaneously using the batch setting function. Moreover, IP Installer can save the network settings for
all devices as a backup and restore them when necessary.
Preparation before IP Assignment
1.
Always consult your network administrator before assigning an IP address to your server in order to avoid
using a previously assigned IP address.
2.
Ensure the P500/1500 is powered on and correctly connected to the network.
3.
MAC Address: Each device has a unique Ethernet address (MAC address) shown on the label of the
device as the serial number (S/N) with 12 digits (e.g. 000429-XXXXXX).
*0004290000B1
4.
Although the IP Installer is able to find and configure any P500/1500 on the LAN except those that are
behind a router, it is a good idea to set the host PC to the same subnet. In order to connect to the
Web-based user interface of P500/1500, the host PC must be in the same subnet. For more information
about subnets, please consult your network administrator.
Using IP Installer to Assign an IP Address to P500/1500
1.
Once IP Installer has been successfully installed on the PC, double click the IP Installer icon on the
desktop, or select it from Start > Programs > IP Installer > IP Installer > Launch IP Installer.
- 9 -
Advertisement
Table of Contents
