4. Event Setup
General Setup
M
/
S
displaying on the screen indicates respectively motion detection or GPIN is
-
Event Icon:
triggered. Set this function "On" to enable displaying the two icons.
Event Duration: Set the duration time for recording after the event goes away. Available selections
-
are 5, 10, 15, 20, 25 and 30 seconds.
Pre Alarm: When an event is triggered, a video clip will be sent with Email or saved to FTP site. You
-
can adjust this option to determine the beginning time of video clip before the event is triggered. The
unit is in second.
-
Apply: Confirm the settings.
- 29 -