Using Your Sonic Duo ™ Carpet, Wood & Hard Floor Cleaner; Cleaning Your Carpets; Duo - Shark KD451T Owner's Manual

Using Your Sonic Duo
IMPORTANT: Always check with the carpet
manufacturer or distributer before using the
Shark
® Activating Pretreater Stain & Odor
Remover or the Low Moisture -No Rinse - Carpet
Shampoo. To determine the colorfastness of any
carpet -especially with reds or blues - take a
clean, moist towel and gently rub a small area in
an inconspicuous area. If color comes off on the
towel, you should discontinue use.

Cleaning Your Carpets

The Sonic Duo comes with a Reusable Bottle
™
with a "Purple" cap. This is to be used with the Low
Moisture -No Rinse- Carpet Shampoo. The Sonic

Duo

also comes with a second faster setting that
™
is to be used when cleaning carpets.
Step 1:
1 Vacuum your carpets and/or area rugs to
remove any loose dirt or dust that may have
accumulated in the carpet.
2 Use the Activating Pretreater Carpet Stain &
Odor Remover to pretreat any spots and stains
that stand out. Spray the spots until saturated
and let sit for 5-10 minutes.
Step 2:
3 Attach the Carpet/Rug Cleaning Pad to the
bottom of the Sonic Duo
"Purple" trim and a "Purple" tag that says
"Carpet/Rug Cleaning Pad" on it. Attach the
side of the Carpet/Rug Cleaning Pad with the tag
to the back of the Sonic Duo
4
To remove the Reusable Bottle, hold it and pull
it up to remove it from the unit. (Fig. 5) Remove
the cap.
5 Take the Reusable bottle with the "Purple" cap
and fill it first with water until the "Water Fill
Line" and then with the Low Moisture -No Rinse
- Carpet Shampoo until the "Solution Fill Line".
(Fig. 6)
Always fill with cold water first and then the
add the cleaning solution to avoid foaming
and to ensure accuracy.
4 TOLL FREE: 1-800-798-7398
KD451T_26_IB_E_130103_2.indd 4
Carpet, Wood & Hard Floor Cleaner
™
. This pad has a
™
. (Fig. 4)
™
fig. 4
fig. 6
fig. 8
NOTE: For heavy traffic areas we recommend
that you dilute the solution 3 parts water to
1 part solution. For weekly maintenance we
recommend that you dilute the solution 7 parts
water to 1 part solution.
6 Screw the bottle cap on tightly and insert the
Reusable Bottle into the unit upside down. Push
it down to make sure that it is well inserted. You
will hear an audible "Click" when the Reusable
Bottle is inserted properly. (Fig. 7)
7 Twist the quick release cord holder to unwrap
the power cord completely. (Fig. 8)
Plug into an electrical outlet and slide the "On/
Off" button turn the Sonic Duo
the faster "II High" setting. (Fig. 9)
fig. 5
fig. 7
fig. 9
on. Select
™
13-01-03 3:53 PM