Table of Contents
Advertisement
Using Your Sonic Duo
IMPORTANT: Always check with the carpet manufacturer or distributer before using the Shark
or the Carpet Cleaner. To determine the colorfastness of any carpet -especially with reds or blues - take a clean,
moist towel and gently rub a small area in an inconspicuous area. If color comes off on the towel, you should
discontinue use.
fig. 7
Cleaning Your Carpets
The Sonic Duo
®
comes with the Carpet Cleaner. The
Sonic Duo
also has a second Carpet Mode (II) that
®
should be used when cleaning carpets. Please note
that not all carpets react to the Sonic Duo
way. Some carpets will require more time and cleaning
solution than others.
REGULAR CLEANING
Step 1:
1
Vacuum your carpets and/or area rugs to remove
any loose dirt, dust, or debris that may have
accumulated in the carpet.
Step 2:
2
Attach the Carpet/Rug Cleaning Pad to the bottom
of the Sonic Duo
. This pad has a "Purple" trim
®
and tag that says Carpet/Rug Cleaning Pad. Attach
the pad as shown in (Fig. 7) – the tag should be
positioned toward the back of the Sonic Duo
3
Insert the Carpet Cleaner into the unit. Push it down
to make sure that it is well inserted. You will hear an
audible "Click" when the Bottle is inserted properly.
(Fig. 8)
4
1-800-798-7398
®
Carpet, Wood & Hard Floor Cleaner
fig. 8
the same
®
4
5
®
.
6
fig. 9
fig. 10
fig. 11
Twist the quick cord release holder to unwrap
the power cord completely. (Fig. 9) Plug into an
electrical outlet and slide the "ON/OFF" button to
turn the Sonic Duo
on. Select the faster Carpet
®
Mode (II). (Fig. 10)
Lightly step on the back of the scrubbing head to
release the handle.
WARNING: Never stand on the Sonic Duo
Begin cleaning by pressing the Spray Button to
apply the cleaning solution to the carpet that is to be
cleaned. (Fig. 11) Spray the solution continuously
while pushing the unit forward and then pulling it
backward until the area to be cleaned is damp.
®
Carpet Pretreater
.
®
Advertisement
Table of Contents
