Technical Specifications - Nagra -VI Operating Instructions And Reference Manual

CHAPTER VI
Recording
Data storage medium
Removable media
Disk format
Recording Method
File type
A/D & D/A conversion
Tracks
Sampling Rate
Recording capacity
Mono / polyphonic
Pre-recording buffer
Display
Level meters
Inputs
Digital inputs
Analogue inputs
Microphone input sensitivity
Limiters
Line input sensitivity
THD at 1 kHz
Frequency response
Input noise with condenser mic
Input noise with dynamic mic
Signal-to-noise ratio
Input level adjustment range
Input filters
Slate microphone
Outputs
Analogue line output
Digital output
Headphones
Internal speaker
Other
USB Host
USB Device
Time code IN/OUT
M/S Decoder
Word Clock
Dither
General
Dimensions
Weight
Power supply
Power Consumption
Charge time
Ext. power out
Relative humidity
Chapter VI (Technical specifications)

TECHNICAL SPECIFICATIONS

120 GB Internal hard disk
Compact Flash type I / II (Hot Swappable)
FAT 32
Linear digital PCM
16 / 24 bit Broadcast Wave File BWF (WAV), iXML, AES 31
compatible
24 Bit Sigma-Delta
8 individual
44.1, 48 kHz, 88.2 and 96 kHz (with 0.1% pull up / down)
20 mins of 6 track 24 bit 48 kHz per GB of disk / memory
Selectable
Up to 20 seconds @ 48 kHz 24 bit on 6 tracks.
3.5 inch colour LCD TFT
On colour display AND by LED for microphone inputs
2 x XLR AES-3 shared with analogue inputs 5+6
4 x symmetrical XLR Microphone (Dynamic, +48V Phantom) / line
2.8, 10 and 30 mV/Pa selectable
Selectable on microphone inputs, individual or in pairs.
active at -7.6dBFS, max +40dB for -2 dBFS
Adjustable from -6 dBm up to +24 dBm for 0 dBFS recording
<0.1% Mic, <0.01% line (measured on AES out)
Mic, 10Hz - 48 kHz ± 0.5 dB, Line ±0.2 dB (measured on AES out)
0.88 µV (-119 dBm)
4 dB (measured ASA "A" loaded 200 )
>114 dB
50 dB Mic and from -6 to +24 dB Line
LFA (with vortex filtering)
Electret behind the front panel
2 x XLR 4.4V max (+15 dBm)
XLR AES-3 (24 bit or 16 bit dithered)
2 x Stereo 6.3mm (¼") Jack 50
1W
USB 2.0 connector type "A"
USB 2.0 connector type "B"
5 pin LEMO (SMPTE / EBU)
Switchable
9-pole "D" type connector
Menu selectable 24/16bits on Inputs and/or Outputs
320 x 74 x 305mm (W x H x D) (Incl. battery box)
12½ x 3 x 12" (W x H x D) (Incl. battery box)
3.8 kg (8.3 lbs) (with std. battery box)
4.3 kg (9.5 lbs) (with large capacity battery pack)
Lithium-Ion, or external 9 - 16V (XLR 4 pole)
Approximately 10W
~3 hours (with 4.5 Ah Lithium-Ion pack)
~5 hours (with 13.8 Ah Lithium-Ion pack)
2 Hirose 12V (max 1A)
From 10% to 99% (non condensing)
73 July 2010