IMPORTANT SERVICE SAFETY INFORMATION Operating the receiver outside of its cabinet or with its back removed involves a shock hazard. Those who are thoroughly familiar with precautions necessary when working on high voltage equipment should only perform work on these models. Exercise care when servicing this chassis with power applied.
A. SPECIFICATION Color System : PAL、SECAM Sound System : I、D/K、B/G、L/L’ Frequency range: 45M~855.25M IF Frenquency Video: 38.9MHz Sound: 33.4MHz Chroma: 34.47MHz Audio output power 10%THD 4W X 2 Antenna Impedance 75Ω(Unbalance) Power Consumption 160W(26’’ and 27’’) , 180W(32’’) Power Supply : AC~110-240V,50/60Hz item Port list RF Cable...
ADJUSTMENT MANUAL Ⅰ. TEST NOTE Please follow the pointed test steps and choose the right test equipment to conduct adjustment, otherwise good effect of Unit could not be obtained. The unit should be warmed up for 30 minutes before adjustment and every parameter should be adjusted repeatedly till the optimum value obtained, the pointed voltage value should be ensured during test to get satisfied test result.
4.5 White calibration adjustment 1 Receive black or white signal under AV or PC mode, adjusting brightness and contrast to set the brightness to 15Nit in dark area and 90 Nit in bright area. 2 Adjust white balance. Press“MENU”button once, then press “RECALL” five times to enter factory menu, select “Temp”...