Table of Contents
Advertisement
o
@
@ Numer¡c keys
in VFO mode:
in M.ch mode:
in MESSAGE
entry moder
@ sree r"v
in VFO mode:
Press the ENTER key and then
these keYS to enter a frequencY
directly.
Press these keYs to recall a Pro-
grammable band.
Press these keYs and then the
ENTER keY to enter a MemorY
channel directlY.
Press these keYs (1 - 7) to enter
a symbol.
This key is used to select the
Frequency step.
Pressing the keY during the
AUTO mode will release the
AUTO mode function.
This key is used to sPecifY or
release the Memory Channel to
be locked out dur¡ng scan opera-
tions.
@ rt¡ rey
in VFO mode:
in M.ch mode:
@ eruren tey
in VFO mode:
This key is used to enter a fre-
quency into a MemorY channel'
This key is used to transfer a
Memory channel frequency into
VFO mode. (MEMORY SHIFT)
This keY is used to beg¡n the
direct keYboard inPut of
the
operating frequencY using the
numeric keys'
This keY is used to directlY inPut
the Memory channel number us-
ing the numeric keYs.
Tuning contro¡
This control is used to select the desired receive fre-
quency, Memory channel. Scan direction' and
MESSAGE charactor'
UP/DWN keYs
These keys are used to step increase or decrease the
desired receive frequency, Memory channel' Scan
direction, and MESSAGE digit.
O t'looe rey
This keY is used to select the MODE'
@
@
@
C key
This iey is used to release SCAN, and Memory Entry'
and to clear a frequency selection or Memory channel
selection when us¡ng the numeric keys'
S. SEL keY
This key is used to select the desired SCAN mode'
BEEP key
This key is used to turn the Audio confirmation tones
ON and OFF.
in M.ch mode:
in M.ch mode:
Advertisement
Table of Contents
