Download Print this page

Memory Channel; Memory Contents; Memory Entry - Kenwood RZ-1 Instruction Manual

Wide band receiver
Hide thumbs

Advertisement

. Microprocessorlnitialization
When you want to erase all programmed data, or if the
display should show erroneous information, you should in-
itialize (reset) the microprocessor using the following pro-
cedure.
There are two methods for resetting the microprocessor.
A. Rest all user programmed data except the contents of
the Memory Channels.
1. Turn the POWER switch OFF.
2. Press and hold the ENTER key and turn on the
POWER switch.
3. Release the ENTER key.
B. Reset all user programmed data including the contents
of the Memory Channels.
1. Turn the POWER switch OFF.
2. Press and hold the M key and UP (^)
key and turn
on the POWER switch.
3. Release the M key and UP (^)
key.
4-3-3. Memory Channel
This receiver provides 10O Memory Channels (00-99).
In addition to serving as normal memory channel some of
the memory channels are used to specify other parameters.
The functions of these Memory Channels are discribed
below.
* M e m o r y C h a n n e l 1 0 , 2 0 , 3 0 . 4 0 . 5 0 , 6 0 . 7 0 , 8 0 , 9 0 ,
and OO are used to store the limit for the Programmable
Band and Programmable Band Scan function.
* M e m o r y C h a n n e l 1 9 , 2 9 , 3 9 , 4 9 , 5 9 , 6 9 , 7 9 , 8 9 , 9 9 ,
09 are used to store the limit for the Programmable
Band and Programmable Band Scan function.
4-3-4.
Memory Contents
Each Memory Channel is capable of storing the frequency,
m o d e , s y m b o l ( [ l ,
@ , . . . . . ) , a n d m e s s a g e . ( R e f e r t o
Message Memory page 25.)
4-3-5. Memory Entry
Memory Entry must be begun in the VFO mode.
1. Press the VFO/M.ch key to select the VFO mode.
Select the desired frequency using the Tuning control,
UP/DWN key, or the numeric keys and the ENTER key.
Select the appropr¡ate MODE.
(For example 145.220 MHz, AUTO model
I tJ
t-_ _:l _:l ,-t ,-l
I
| _1. t_
,_
l_1. t_l
MHz
SIGIIAL
$it8"- u*
t''*
I auro
scat{ - srrx
t
t
t
t
l
2. Press the M key. The last Memory channel that was
previously recalled will appear and the channel number
will flash.
(For example M.ch O0 : empty)
'
., ,THt
-
r-rr-l
-
--'J'-t
:
l ' | '
SIGIIAL
TOOE -
sf€P - 5r
scat{ - $rf
l
l
t
l
1 9

Advertisement

loading

  Also See for Kenwood RZ-1

  Related Manuals for Kenwood RZ-1