Key Lock/Ignition - Vectrix ZEV Owner's Manual

kEy lock / igniTion
Only one key is needed to start your Vectrix, get into
the storage area, open your glove compartment and
lock your bike.
The ignition switch is located in the center of the
Vectrix in front of the stepthrough. The ignition
features a number of positions that allow you to lock
and unlock areas of the Vectrix.
noTE!
DUpliCaTe KeYS
See your service center for duplicate keys.
pOSiTiOnS:
. lOCK STeerinG
When the key is turned to this setting, you are
able to lock the steering mechanism. You simply
pull out the key and your Vectrix is fully locked
until reinsertion of the key.
. SYSTeM Off
In this position the Vectrix will be off, including the
motor and lights.
3. SYSTeM On
In this position you will be able to ride the
Vectrix.

VECTRIX ZEV OWNER'S MANUAL
4. GlOVe BOX
In this position you will be able to pop open the
glove box. To do this, push the key down and turn
it counter-clockwise to the glove box position. To
lock the glove box, simply shut the door and it will
automatically lock itself.
5. TrUnK UnlOCK
In this position you will be able to open the trunk.
3. System On
To do this push the key down and turn it clockwise
to the trunk position.
noTE!
Do not attempt to open your trunk while someone
is sitting on the trunk. This could cause the
mechanism to break.
. lock Steering . System Off
4. Glove Box 5. Trunk Unlock