Start-Up Guide; Checking The Accessories; 1: Attaching The Stand; 2: Connecting An Antenna/Cable/Vcr - Sony Bravia KLV-46BX450 Operating Instructions Manual

Start-up Guide

Checking the accessories

Stand (1) and screws (3)
Remote RM-GA021(1) (KLV-46/40BX450,
KLV-32BX35A, KLV-32/26/22BX350 only)
Remote RM-GA022(1) (KLV-40CX450,
KLV-32/26/22CX350 only)
Size AA batteries (R6 type) (2)
To insert batteries into the remote

1: Attaching the stand

• Refer to the supplied stand leaflet for proper
attachment for some TV models.
• For best picture quality, do not expose the screen to
direct illumination or sunlight.
• Place the TV with its screen facing down on a level and
stable surface covered with a thick and soft cloth.
• Hold the Table-Top Stand with one hand to avoid it
dropping when attaching.
Thick and soft
cloth
* Be careful not to hit the Table-Top Stand against
the edge of the surface when attaching it.
• If using an electric screwdriver, set the tightening
torque at approximately 1.5 N·m (15 kgf·cm).
• Ensure the AC power cord is away from screw holes
during stand installation to avoid damage to the AC
power cord.
4
GB
Push to
open
2: Connecting an antenna/
cable/VCR
• Connecting cables are not supplied.
Connecting an antenna/cable
Connecting an antenna/cable and VCR
AV cable
VCR
Antenna cable
Antenna cable
Antenna cable