Screen - Sony Bravia KLV-46BX450 Operating Instructions Manual

Dual Sound
Speakers
Audio Out
HDMI/DVI Audio
Source
(only in HDMI 1 input
mode)

Screen

Wide Mode
Auto Wide
4:3 Default
Auto Display Area
Display Area
Horizontal Shift
Vertical Shift
Sets the sound from the speaker for a stereo or bilingual broadcast.
"Stereo"/"Mono": For stereo broadcasts.
"Main"/"Sub"/"Mono": For bilingual broadcasts, select "Main" for sound channel 1,
"Sub" for sound channel 2, or "Mono" for mono channel, if available.
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM programme, select "Mono". The
sound becomes monaural, but the noise is reduced.
• The "Dual Sound" setting is memorized for each programme position.
• You cannot listen to stereo broadcast sound when "Mono" is selected.
z • If you select other equipment connected to the TV, set "Dual Sound" to "Stereo", "Main"
or "Sub". However, when the external equipment connected to the HDMI jack (except
HDMI 1) is selected, this is fixed to "Stereo".
• If you access to FM Radio mode, set "Dual Sound" to "Stereo" or "Mono".
"TV Speakers": Turns on and outputs the TV's sound from the TV speakers.
"Audio System": Turns off the TV speakers and outputs the TV's sound from external
audio equipment connected to the audio output jacks on the TV.
You can also turn on the connected equipment that is compatible with Control for
HDMI, after making the appropriate settings of Control for HDMI.
"Variable": When using an external audio system, volume output from audio out can
be controlled using the TV's remote.
"Fixed": The audio output of the TV is fixed. Use your audio receiver's volume control
to adjust the volume (and other audio settings) through your audio system.
Switches the audio signal for HDMI input when a DVI device is connected. Select from
"Auto", "HDMI Audio" and "PC Audio".
For details about wide mode, see page 9.
Automatically changes the wide mode according to the input signal from an external
equipment. To keep your setting, select "Off".
z • Even if "Auto Wide" is set to "On" or "Off", you can always modify the format of the
screen by pressing
Selects the default screen mode for use with 4:3 broadcasts.
"Wide Zoom": Enlarges the 4:3 picture to fill the 16:9 screen, keeping the original image as
much as possible.
"Normal": Displays conventional 4:3 broadcasts in the correct proportions.
"Off": Keeps the current "Wide Mode" setting when the channel or input is changed.
"On": Automatically adjusts the display area based upon the content.
"Off": Turns off the "Auto Display Area". Choose one from the "Display Area" options.
• "Auto Display Area" is only available when watching programmes from HDMI input.
Adjusts the picture display area.
"Full Pixel": Displays the picture for 1080/50i, 1080/60i, 1080/50p and 1080/60p
sources (HDMI or component input only) or 1080/24p sources (HDMI input only) in
the original size. (KLV-40CX450, KLV-40/46BX450 only)
"+1": Displays pictures in their original size. This option may not be available
depending on input signal.
"Normal": Displays pictures in their recommended size.
"-1": Enlarges the picture so that the edges are outside the visible display area.
Adjusts the horizontal position of the picture when "Wide Mode" is set to "Wide Zoom"
or "Zoom".
Adjusts the vertical position of the picture when "Wide Mode" is set to "Wide Zoom"
or "Zoom".
repeatedly.
Continued
21
GB