6.6
Output Format for Unit and Decimal Point
Position
These outputs are issued in the following format by the TS2 + "Device Trigger (GET)" + LF command.
S1S2CCCUUUUUU, PCrLf
Each symbol denotes the following:
S1:
S2:
CCC:
UUUUUU:
P:
Note
• Data in the channels not connected in the system settings, including channel numbers, are not output.
Data status 1
N --------------------- Normal
D --------------------- Differential input
S ---------------------- Measurement range skips.
Data status 2
Space ---------------- Interim data
E ---------------------- Final data
Channel number (3 characters)
Computation channels
A01 to A30 (DR130/230/240)
Unit (6 characters)
mV
------- mV
V
------ V
------ °C
C
UUUUUU ----------- arbitrary
Decimal point position (0 to 4)
0 ---------------------- 00000
1 ---------------------- 0000.0
2 ---------------------- 000.00
3 ---------------------- 00.000
4 ---------------------- 0.0000
6
6-7