Table of Contents
Advertisement
2.1
Description of Functions
Listener and Talker Functions
Listener Function
This allows almost all settings except power on/off and operation control.
• Settings except communication settings.
• Operation control except power on/off.
• Call-up of setting data
• Specifying of output data (specifying of channel numbers or output data types)
Talker Function
The following data can be output:
• Measured data
• Computed data
• System configuration
• Data for operation mode setting
• Data for setup mode setting
For measured data and computed data, either binary output or ASCII output can be selected. Other
data are output in the form of ASCII data.
Data Output
When trigger(GET) becomes activated DR130/DR230/DR240 will store the new data in a buffer.
When an output request such as the FM command is received, these new data will be output.
2
2-1
Advertisement
Table of Contents
