Appendix A Networking Connection; Switch's Rj-45 Pin Assignments; Cable Pin Assignment - Planet FST-811 User Manual

A.1 Switch's RJ-45 Pin Assignments
10/100Mbps, 10/100Base-TX
RJ-45 Connector pin assignment
Contact MDI
Media Dependant
Interface
1 Tx + (transmit)
2 Tx - (transmit)
3 Rx + (receive)
4, 5
6 Rx - (receive)
7, 8
A.2 RJ-45 cable pin assignment
The standard RJ-45 receptacle/connector
There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following shows the pin allocation
and color of straight cable and crossover cable connection:
Please make sure your connected cables are with same pin assignment and color as above picture before deploying the
cables into your network.

APPENDIX A NETWORKING CONNECTION

MDI-X
Media Dependant
Interface -Cross
Rx + (receive)
Rx - (receive)
Tx + (transmit)
Not used
Tx - (transmit)
Not used
Figure A-1: Straight-Through and Crossover Cable
19