Cisco Interface Cards - Cisco 850 Series Manual

Notes
178

Cisco Interface Cards

Serial WICs
Product Description
WIC-1T Provides a single serial
connection at up to T1/E1
One-port Serial WIC
rates . The DB-60 connector
supports any of five interface
types (RS-232, RS-449,
RS-530, V .35, X .21) in either
DTE or DCE mode . This
interface card inserts into a
Cisco mixed-media network
module or directly into a
Cisco WIC expansion slot .
Modular Router Solutions
Serial and Legacy
Concentration
WIC-2T Provides two serial
connections up to
Two-port Serial WAN
8 Mbps . The smart serial
Interface Card
connector supports any
of six interface types
(RS-232, EIA-449, EIA-530,
EIA-530a, V .35, X .21) in
either DTE or DCE mode .
This interface card inserts
into a Cisco mixed-media
network module or directly
into a Cisco WIC expansion
slot .
Modular Router Solutions
Serial and Legacy
Concentration
WIC-2A/S
Provides two low-speed
serial interfaces at speeds
Two-port Asynchronous/
up to 128 Kbps . This WIC
Synchronous Serial WIC
supports asynchronous
and synchronous traffic,
and plugs directly into a
WIC expansion slot .
Modular Router Solutions
Serial and Legacy
Concentration
Supported Platforms
and Minimum Cisco
IOS Versions Comments
3800 Series–12 .3(11)T Supported in chassis
WIC slot or one of the
2800 Series–12 .3(8)T4
following mixed-media
1841–12 .3(8)T4
network modules:
NM-2W, NM-1FE2W-V2,
NM-2FE2W-V2, or
NM-1FE1R2W .
3800 Series–12 .3(11)T Supported in chassis
WIC slot or one of the
2800 Series–12 .3(8)T4
following mixed-media
1841–12 .3(8)T4
network modules:
NM-2W, NM-1FE2W-V2,
NM-2FE2W-V2, or
NM-1FE1R2W .
3800 Series–12 .3(11)T Supported in chassis
WIC slot or one of the
2800 Series–12 .3(8)T4
following mixed-media
1841–12 .3(8)T4
network modules:
NM-2W, NM-1FE2W-V2,
NM-2FE2W-V2, or
NM-1FE1R2W .
179