Cisco 850 Series Manual page 104

Cisco Voice Interface Cards
Analog Voice Interface Cards
continued
Product Description
VIC2-2FXO
FXO ports are used to
connect to PBX or key
Two-port FXO Voice/Fax
systems, or to provide
Interface Card (universal
off-premise connections
card for all countries) .
to PSTN or PTT . Supports
Also Supports CAMA
battery reversal detection
(Centralized Automated
and caller ID . These Cisco
Message Accounting) on
VICs can be software-
Any Port .
configured to work in all
countries . Also used to
connect to analog CAMA
trunk to provide dedicated
E-911 service (North
America only) .
Modular Router Solutions
Voice and Fax Integration
VIC2-4FXO
FXO ports are used to
connect to PBX or key
Four-port FXO Voice/Fax
systems, or to provide
Interface Card (universal
off-premise connections
card for all countries) .
to PSTN or PTT . Supports
Also Supports CAMA
battery reversal detection
(Centralized Automated
and caller ID . These Cisco
Message Accounting) on
VICs can be software-
Any Port .
configured to work in all
countries . Also used to
connect to analog CAMA
trunk to provide dedicated
E-911 service (North
America only) .
Modular Router Solutions
Voice and Fax Integration
VIC2-2E/M The two-port E&M voice
interface card for Cisco
Two-port E&M Voice/
voice/fax network modules
Fax Interface Card .
is used to connect to
Also Supports CAMA
PBX or key system trunk
(Centralized Automated
lines . This voice interface
Message Accounting)
card works with existing
on Any Port .
phone and fax equipment
to provide voice and fax
services over IP, and is
compatible with H .323
standard for audio- and
video conferencing .
Modular Router Solutions
Voice and Fax Integration
202
Supported Platforms
and Minimum Cisco
IOS Versions Comments
3800 Series–12 .3(11)T When used in a Cisco 2800
or 3800 router, requires a
2800 Series–12 .3(8)T4
DSP module .
12 .3 Mainline and forward
supported in IP Voice
feature set .
3800 Series–12 .3(11)T When used in a Cisco 2800
or 3800 router, requires a
2800 Series–12 .3(8)T4
DSP module .
12 .3 Mainline and forward
supported in IP Voice
feature set .
3800 Series–12 .3(11)T When used in a Cisco 2800
or 3800 router, requires a
2800 Series–12 .3(8)T4
DSP module .
12 .3 Mainline and forward
supported in IP Voice
feature set .
Analog Voice Interface Cards
continued
Product Description
VIC-4FXS/DID
FXS port is used to connect
directly to phones, fax
Four-port FXS Voice/Fax
machines, and key systems .
Interface Card
Generates battery polarity
reversal and caller ID .
Modular Router Solutions
Voice and Fax Integration
ISDN BRI Voice Interface Cards
Product Description
VIC2-2BRI-NT/TE This two-port ISDN
terminal-side or
Two-port BRI Voice/Fax
network-side Basic Rate
Interface Card
Interface (BRI) voice
interface card connects
directly to PSTNs and
PBX/PABXs and supports
both on-premise and
off-premise connections .
Supports a total of four
voice channels in a single
interface card via two
RJ-45 physical ports, and
enables toll-bypass and
voice-over-packet features .
Modular Router Solutions
Voice and Fax Integration
Cisco Voice Interface Cards
Supported Platforms
and Minimum Cisco
IOS Versions Comments
3800 Series–12 .3(11)T When used in a Cisco 2800
or 3800 router, requires a
2800 Series–12 .3(8)T4
DSP module .
12 .3 Mainline and forward
supported in IP Voice
feature set .
Supported Platforms
and Minimum Cisco
IOS Versions Comments
3800 Series–12 .3(11)T When used in a Cisco 2800
or 3800 router, requires a
2800 Series–12 .3(8)T4
DSP module .
12 .3 Mainline and forward
supported in IP Voice
feature set .
203