Map Display; Showing Current Position; Scrolling The Map - Kenwood KNA-DV2100 Instruction Manual

Map Display

Showing Current Position

This shows the current position of your vehicle.
1
Touch the button.
2
The current position of your vehicle will be shown.
(Current Position Screen)

Scrolling the Map

Touching the screen scrolls the map.
1
Touch the screen.
2
Touch the map within 5 seconds.
3
The screen automatically scrolls so that the point
you touched with your finger becomes the center
of the map. (Map Screen)
NOTE :
The screen can scroll up, down, left, right and diagonally in a total of eight
directions.
• Current Position Screen (auto-mode).... Scrolls automatically according to the movement of
your vehicle. (The map automatically follows your current position.)
• Map Screen (manual mode).... Shows the map of the location you want to see. It does not
scroll automatically with the movement of your vehicle.
• When you switch to the Map Screen, it stops automatically scrolling. If you then select the
button, the Current Position screen reappears and the map returns to auto scroll.
• To quickly search for a location on the Map Screen, first zoom the map to a wide area scale and
move it to the general area of the location. Then zoom it to a smaller area scale to find the
specific location.
• When you touch the screen, it scrolls towards the place touched. If you keep touching the
screen, scrolling continues in the direction of the place touched (one of eight directions). If you
keep touching the screen longer, scrolling speeds up.
13