Troubleshooting; Seagate Support - Seagate Business Storage Windows Server 4-Bay NAS Administration Manual

13. Troubleshooting

13. Troubleshooting
How do I reset the Administrator password if it is lost?
You cannot recover a lost Administrator password. You must reinstall the Windows partition
to reset the password.
Why can't I mount my iSCSI target on more than one location?
The iSCSI system works by emulating a SCSI hardware system, but instead of passing the
disk commands from a SCSI disk controller to a SCSI disk, the iSCSI system passes the
commands over a network to a virtual disk. If two iSCSI initiators interleave commands to the
same disk, the disk can be corrupted. To prevent corruption, an iSCSI target can only be
connected to one iSCSI initiator at once.
Why can't I use BitLocker on the C: Drive?
You can, but access to the C: drive needs to be authenticated at system boot time. This can
be provided in the form of a manually entered password or a password on a USB drive. See
chapter 3 for details.
Why can't I use this product with terminal services?
Windows licensing requires separate user licenses for each user accessing the system
through terminal service.

Seagate Support

Contact Seagate Support at
Seagate Business Storage Windows Server 4-Bay NAS Administration Guide
www.seagate.com/support
33